SPST NO DC Relay For Lift Table Power Unit Intermittent Working Duty With Competitive Prices

Features

◪ Intermittent 150A load.

◪ It has one set of normally open contacts.

◪ Coil power consumption ≤22W.

◪ The insulation resistance is up to 100MΩ (1,000VDC), the withstand voltage between the contact and the coil is 2kV.

◪ IP protection level: IP67.

◪ Compliant with IEC 60664-1, GB/T14048.1 and GB/T14048.4 requirements.

◪ Compliant with RoHS (2015/863/EU), REACH (1907/2006/EC) requirements.

◪ Safety certificate: CE, RoHS

 

Specifications

Performance Parameters (at 23℃)
Contact Arrangement		1NO
Contact Resistance		≤5mΩ
Contact Voltage Drop		≤80mV (at 150A)
Overload Current		≤7le, ≯1s
Temperature Range		-40℃~55℃
Load Terminal		M6 External Thread
Humidity		5%~95%RH
External Dimension		62.5mm*61mm*67.8mm
Operating Duty		Intermittent
Electrical Durability with Load (Resistive)		≥50,000 Times
Load Wiring Torque		6-8N.m
Pull-In Voltage		≤70% Us
Drop-Out Voltage		5%-40% Us
Contact Bounce Period		≤5ms
Pull-In Time		≤20ms
Drop-Out Time		≤10ms
Dielectric Strength	Between Main Contacts	50Hz/60Hz 1,500VAC/1min
	Between Main Contacts and Coil	50Hz/60Hz 1,500VAC/1min
Insulation Resistance	Initial State	100MΩ 1min
	After Electrical Life	50MΩ 1min
Shock	Stability	20g (Power On)
	Strength	50g
Vibration		3.5g, 10~200Hz, 1/2 Sine Wave (Power On)
Mechanical Durability		≥100,000 Times
Coil Wiring Torque		1.2 - 2.0 N.m

ADC300I Coil Parameters
Coil Voltage (V)	Pull-In Voltage (V)	Drop-Out Voltage (V)	Coil Resistance (Ω)	Coil Power Consumption (W)
12V	≤70%Us	5%-40%Us	7.3Ω±10%	20W±10%
24V	≤70%Us	5%-40%Us	26.8Ω±10%	22W±10%
36V	≤70%Us	5%-40%Us	65Ω±10%	20W±10%
48V	≤70%Us	5%-40%Us	134Ω±10%	20W±10%
60V	≤70%Us	5%-40%Us	190Ω±10%	20W±10%
72V	≤70%Us	5%-40%Us	272Ω±10%	20W±10%

Product Introduction

This series DC Contactor is widely used in electromobiles, electric forklifts, electric winches, engineering machinery, etc.

Model Coding

Wiring Diagram

Outline Installation Dimension Drawing

 

Note: These datas are only for customer selection reference, AOKAI has tried the best to ensure the accuracy of the information. Product specifications and parameters may be changed due to product improvement etc., they may be inconsistent because of not updated in time. For the specific parameters and performance of each product, please refer to the samples provided by AOKAI and the corresponding signed and controlled specification.

 

Note: These datas are only for customer selection reference, AOKAI has tried the best to ensure the accuracy of the information. Product specifications and parameters may be changed due to product improvement etc., they may be inconsistent because of not updated in time. For the specific parameters and performance of each product, please refer to the samples provided by AOKAI and the corresponding signed and controlled specification.