12VDC 80Amp Low Tension Electromagnetic Contactor Solenoid Controlled Relay
ANR80 12V/24V/36V/48V/60V/72V/84V/120VDC 80A 1NO Contact AOKAI DC Contactor
ANR80 have one normally open contact, which means contacts are open when coil is de-energized. It is single pole contactor. ANR80 can be used in the altitude less than 2KM. ANR80 is tested for shock and vibration, the standard tested to is BS EN 61373.
It can be used for the battery, the rectification power and supplies power, using for handling drawing, the pump motor and other electronic vehicles.
Q: What is the main contact?
A: Made of fixed (stationary) and moving contacts – designed to carry the power circuit. Termination may be stud, female or busbar, depending on the contactor type and therefore dictated by requirements and type of applications.
|Brand: AK/AOKAI |
Name: DC Contactor
Rated Coil Voltage: DC12V/24V/36V/48V/60V/72V/84V/120V etc.
Coil Power Consumption: 4-10W
Rated Current: 80A
Dimension: 73.5*54.5*82 (mm)
Weight: About 210g
Coil Rated Voltage
DC12V, 24V, 36V, 48V, 60V, 72V, 84V, 120V etc.
Contact Circuit Rated Load Current (A)
Main Circuit Contact Voltage Drop (Load:100A)
Under (20±5)℃, Cooling Pull-in Voltage
Under (20±5)℃, Cooling Drop-out Voltage
Acceptable Fluctuation Range of Coil Voltage
Pull-in Time (N/O Contacts to Close)
Drop-out Time (N/O Contacts to Open)
The Max Disconnecting Time of Contacts
Coil Power Consumption (W)
300 Thousand times
AgCdO / AgCuO
Auxiliary Contact Rated Load (Optional Parts)
less than 2Km
International Protection Grade
50g,11ms (Half-Sine Wave)
Aokai Electric is your best source for the high quality 1no 36v dc uninterruptible power supply parts relay with CE certification. We have been one of the largest such manufacturers and suppliers in China since our establishment in 2008. Welcome to contact our factory for the products.