Home > News > Content

Contactor Contact Adhesion

Jun 23, 2018

Contactor contact adhesion is a kind of serious fault, because the contact adhesion can cause the machine out of the control. The causes of this failure are:

1. The load is too heavy, and the contact capacity is too small.

2. The power supply voltage is too low, which cause the insufficient suction of magnetic system and lead to the repeated vibrations of contact, and then cause arc welding.

3. The initial pressure of the contact is too small, the contact will jump very severely when the inductive load is closed, and lead to arc welding.

4. The sparks are too large.

5. When the contact of the silver alloy on the surface of the contact is ablated due to contact wear, the copper contact seat will stick.