Power System 2NO 2NC Reversible Starter DC Contactor Relay
ADC400-DE DC88P 12V/24V/36V/48V/60V/72V/84V/120VDC 400A 2NO+2NC DPDT Short-Time Duty DC Reversing Contactor
The ADC400-DE-CS is our new upgrade product. Below are the improving parts,
Compared with the old type, we use the BMC for the new one’s outer shell, which increases the strength of the shell, and improves the resistance to deformation temperature. The material of old one is bakelite, easy to break.
Improving the design to enhance the function of waterproof, now the waterproof grade can be IP67.
Using the firm integral mounting bracket, which material is aeronautical reinforced nylon, and effectively avoid the wiring touching the metal bracket as old one.
All exposed parts are used the copper or stainless steel screws to prevent rusting. The bottom assembles with four stainless steel countersunk head screws, which improves the balance of contactor.
Working Duty: Intermittent
Coil Rated Voltage
DC12V, 24V, 36V, 48V, 60V, 72V, 84V, 120V etc.
Main Circuit Rated Current (A)
Main Circuit Contact Voltage Drop (Load:100A)
Under (20±5)℃ , Cooling Pull-in Voltage
Under (20±5)℃ , Cooling Drop-out Voltage
Acceptable Fluctuation Range of Coil Voltage
Pull-in Time (N/O Contacts to Close)
Drop-out Time (N/O Contacts to Open)
The Max Disconnecting Time of Contacts
Coil Power Consumption (W)
Intermittent 5,000 times
300 Thousand times
2 NO and 2 NC
AgCdO / AgCuO
International Protection Grade
Way to Install
50g,11ms (Half-Sine Wave)
Aokai Electric is your best source for the high quality power system 2no 2nc reversible starter dc contactor relay with CE certification. We have been one of the largest such manufacturers and suppliers in China since our establishment in 2008. Welcome to contact our factory for the products.