12V 24V 200A DC Electromagnetic Relay Starter
ASW200 serie is designed for uninterrupted loads which the current load is 200 ampere. And the product has one normally open and one normally close contact, for electric vehicles, telecommunication equipment, engineering machinery, car batteries, electric forklift trucks, trains, ships, electronic control systems such as uninterruptible power supply.
Brand: AK/AOKAI Name: DC Contactor Model: ASW200 / SW180Rated Voltage: DC12V/24V/36V/48V/60V/72V Rated Current: 200A Dimension: 62*45.5*123 (mm) Weight: About 730g |
SPECIFICATION
Coil Rated Voltage | DC12V, 24V, 36V, 48V, 60V, 72V |
Main Circuit Rated Current (A) | 200A |
Main Circuit Contact Voltage Drop (Load:100A) | ≤100mV |
Under (20±5)℃, Cooling Pull-in Voltage | ≤70% |
Under (20±5)℃, Cooling Drop-out Voltage | ≥5%Us, ≤40%Us |
Acceptable Fluctuation Range of Coil Voltage | ±20% |
Pull-in Time (N/O Contacts to Close) | ≤30ms |
Drop-out Time (N/O Contacts to Open) | ≤20ms |
The Max Disconnecting Time of Contacts | ≤5ms |
Insulation Resistance | ≥50MΩ |
Dielectric Strength | 50Hz/60Hz 1500VAC/1min |
Overload Current | ≤7Ie, ≤1s |
Coil Power Consumption (W) | ≤12.0W |
Electrical Life | 20,000 times |
Mechanical Life | 300 Thousand times |
Working Mode | Continuous or Intermittent |
Contact Form | 1 NO or 1 NC |
Contact Material | AgSnO/Cu or AgCuO / Cu |
Auxiliary Contact Rated Load (Optional Parts) | 2A/48VDC, 5A/24VDC |
Technical Standard | GB14048.4-2010 |
USAGE ENVIRONMENT
Altitude | ≤2Km | Ambient Temperature | -25~+55℃ |
International Protection Grade | IP50 | Installation Type | III |
Way to Install | Any | Vibration | 2.5g (5~50)Hz |
Impact | 50g,11ms (Half-Sine Wave) | ||
SCHEMATIC DIAGRAM
INSTALLATION DIAGRAM
Hot Tags: Electromagnetic Starter, 200A 12V DC Relay, 12V DC Starter Relay, 12V 24V 200A DC Electromagnetic Relay, Relay 24V